HWg-WLD Relay detects a water leak anywhere along the length of the connected sensing cable (2+2m – 6.5+6.5ft). Water leak or cable disconnection is indicated by activating a relay (NO/NC). The sensor can be connected to a Poseidon unit over the 1-Wire UNI bus (RJ11).
HWg-Juno is an I/O device for IP CCTV integration. You can simply connect digital inputs & relay outputs to your current central IP video management system. HWg-Juno support protocols for seamless integration with most IP Video software packages.
Maxim introduces the MAX5941/MAX5942, the industry's first power-over-Ethernet (PoE) DC-DC controllers that integrate an interface controller for powered devices such as IP phones, wireless LAN access point, and IP cameras. These ICs provide regulated power to a device's system and allow it to be safely powered over the network category-5 (CAT-5) data cable.
STE is an Ethernet thermometer (hygrometer) with SNMP and WEB interfaces. The device alerts temperatures outside of a safe range by e-mail. Supplied with a power adapter and one temperature sensor, another temperature/humidity sensor can be connected.
Linear Technology Corporation introduces the LTC4222 dual Hot Swap™ controller for protecting boards with multiple load supply voltages ranging from 2.9V to 29V.
Linear Technology announces the LTC6420-20 and LTC6421-20, the industry’s first high-speed dual differential ADC drivers with guaranteed gain matching, and exceptional noise and distortion performance.
iDo is project of inteligent device for small or home automation. iDo measure temperature, time, switch heating pump or control opened windows and so on. All what do you want shortly and cheaply.
HWg-PWR is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water or gas consumption using electricity meters, water meters, gas meters, heat meters and other sensors equipped with the M-BUS interface. In addition to metering, the device also supports alarming through e-mail or SNMP traps whenever allowed values are exceeded.
HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network (a relay is switched when a water leak is detected along the sensing cable).
Damocles 1208 provides remote monitoring of electricity consumption. Damocles 1208 is a device with 12 remote inputs and 8 outputs controlled over Ethernet with Web interface. Typical application of Damocles 1208 involves energy consumption monitoring by counting pulses from meters. Damocles 1208 has pulse counters on digital inputs. The device provides M2M communication for connection to SNMP and SCADA systems. The device supports E-mail and SNMP trap notifications of input state changes. Box-2-Box mode - outputs can be controlled over the LAN by another device.
IP WatchDog HWg-WR02a monitors two devices over IP (PING/WEB) or serial line (RS-232), automatically restarts any of them if it stops responding – autonomous ping relay restarter.
Example of a remote door, temperature and humidity monitoring solution. Whenever a door opens, a notification is sent by e-mail or SNMP. Supplied door contacts fit any door, or even the side boards of a 19" rack.